Flow Master FM-2C

Features

Customized to the specified pressure and flow.
Use as a standard for testing and comparing flowmeters.

●　Improved long-term flow stability.

●　Enhanced prevention of distortion during installation.

●　Check the sensitivity of flow testers easily and reliably.

●　Extremely low flow variation ensures long-time stable use.

●　Use as a flow master for measuring deviation flow. (Test for ventilation and bore diameter of holes)

●　15% more compact than conventional products.

●　The numerical value of the tester can be checked by connecting to the CAL port of the tester.

●　Can be used in Flow Check (C-CHK), (F-CHK) of AF series.

●　Joints for connecting to the piping available.

●　Easy connection and disconnection with a plug.

●　ISO/IEC17025 calibration available.

Example of use with our Air Flow Tester

FM-2C Production range

Customized to the desired flow. Use it as a reference instrument.
When placing an order, specify the test pressure and flow in the following ranges.

Test pressure		Flow
Vacuum	-89 to -50.1 kPa	200 mL/min to 5 L/min
	-50 to -21.1 kPa	100 mL/min to 15 L/min
	-21 to -10.1 kPa	100 mL/min to 10 L/min
	-10 to -1 kPa	50 mL/min to 3 L/min
Pressure	1 to 10 kPa	50 mL/min to 3 L/min
	10.1 to 21 kPa	100 mL/min to 10 L/min
	21.1 to 51 kPa	200 mL/min to 15 L/min
	51.1 to 100 kPa	0.3 L/min to 25 L/min
	100.1 to 150 kPa	0.5 L/min to 35 L/min
	150.1 to 200 kPa	0.5 L/min to 45 L/min
	201 to 250 kPa	0.5 L/min to 55 L/min
	251 to 300 kPa	0.5 L/min to 65 L/min
	301 to 350 kPa	0.5 L/min to 70 L/min
	351 to 400 kPa	0.5 L/min to 80 L/min

For specifications outside the production ranges, a request for quotation (RFQ) will be required.
201 to 209 mL/min is outside the standard production range.
2.01 to 2.09 L/min is outside the standard production range.

Minimum unit of test pressure (kPa)

Test pressure	Range	Minimum unit
Vacuum	Down to -89 kPa	0.1
Pressure	Less than 200 kPa	0.1
Pressure	200 kPa or more	1

Accuracy (Difference from the required flow) & Minimum unit

Required flow	Difference from the required flow	Minimum unit
50 mL to 200 mL	Accuracy (Difference from the required flow): Within ±10%	1 mL
0.21 L to 2.00 L		0.01 L
2.1 L to 80 L		0.1 L

For the flow above 200 mL/min, specify in units of L/min.

Main body: FM-2C
Accessories: (IN-side and OUT-side joints (1 set), O-ring (3 pcs.)

Model FM-2C(AB)(C,D)

Example:
HIGH-side joint:R1/2, LOW-side joint:Ø8 tube, Required flow:200 mL/min, Test pressure:10 kPa
FM-2C(R32)(200mL/min,10kPa)

A, B, C and D in the model notation are mandatory.

A	HIGH-side joint	R2	Port size R1/4
		R3	Port size R1/2
		R4	Port size Ø8 tube
B	LOW-side joint		Port size R1/4 *1
		1	Port size R1/2
		2	Port size Ø8 tube
C	Required flow	Please check the production range.
D	Test pressure	Please check the production range.

*1 If the joint connection diameter of the LOW side is R1/4, leave the symbol of LOW joint blank.

Page to Top

WARRANTY/SERVICE

ABOUT COSMO

LEAK TEST

PRODUCTSDownload Catalog

Flow Master FM-2C is ideal for flow measurement and daily inspection of flow testers

Edge & Function

Spec

FM-2C Production range

Classification

Model FM-2C(AB)(C,D)

Appearance

Product List